Official Export Subsidiary of Kaishan Group (Est. 1956) | Quzhou Manufacturing Base

Unsure About Equipment Sizing?

Our Quzhou engineering desk calculates the exact borehole diameter, rock hardness, and necessary CFM/Bar ratio for your project.

Category Showcase

Kaishan DTH Drilling Rigs

Heavy-duty surface crawlers and integrated rigs for open-pit mining, quarry blasting, and slope stabilization. High penetration rate and anti-jamming hydraulic system.

Kaishan PMVQ Series Two-Stage Oil-Cooled PM VSD Screw Air Compressor

The Kaishan PMVQ Series Two-Stage Oil-Cooled PM VSD Screw Air Compressor (models PMVQ15 to PMVQ75) is an ultra-Tier-1 energy-saving industrial compressor engineered for high-consumption manufacturing plants. Delivering 15–75 kW motor power, 2.37–15.6 m³/min free air delivery, and 0.6–0.9 MPa working pressure, the PMVQ Series combines horizontal two-stage compression with an oil-cooled permanent magnet motor, dual independent inverters (main motor + fan) broadening stepless regulation to 12%–100%, an Inovance heavy-duty VFD, a 6090 color controller, and 45°C ambient thermal reliability. Contact our China factory directly for wholesale B2B pricing, custom voltages, OEM/ODM solutions, and fast global delivery.
  • Product Detail Introduction

Core Engineering Features & Performance Advantages

Two-Stage Compression & Oil-Cooled PM Motor

Features a horizontal two-stage rotor layout powered by an oil-cooled permanent magnet synchronous motor delivering ultra-Tier-1 energy efficiency. Optimized Y-profile rotor geometries minimize internal back-leakage, while comprehensive interstage cooling lowers compression ratios, yielding higher air volume and substantially lower specific power consumption for deep factory energy savings.

Dual-Inverter System & 12%–100% Wide-Range Modulation

Equipped with an independent dual-inverter system governing both the main motor and the cooling fan. The variable-speed fan automatically modulates based on oil temperature to eliminate wasted fan power during light loads, broadening airflow stepless regulation to an impressive 12%–100% range with industry-leading partial-load efficiency.

Inovance VFD, 6090 Color Controller & 45°C Thermal Design

Upgraded with an Inovance heavy-duty dedicated PM frequency inverter and the next-gen 6090 color screen controller featuring motor demagnetization pre-warning, advanced sensor diagnostics, and robust IoT telemetry. Redesigned internal air ducts and oversized coolers withstand 45°C ambient temperatures without high-temperature tripping.

Technical Parameters & Specifications Datasheet (PMVQ Series)

Model Discharge Pressure
(MPa)
Air Delivery
(m³/min)
Motor Power
(kW)
Discharge Outlet Weight
(kg)
Dimensions (L×W×H)
(mm)
PMVQ15 0.6–0.9 2.37–2.88 15 G1 300 1040×720×1160
PMVQ22 0.6–0.9 3.5–4.15 22 G1 380 1150×780×1280
PMVQ37 0.6–0.9 5.9–7.58 37 G1½ 530 1300×900×1350
PMVQ45 0.6–0.9 7.73–9.27 45 G1½ 740 1530×1010×1540
PMVQ55 0.6–0.9 9.99–11.95 55 G1½ 770 1530×1010×1540
PMVQ75 0.6–0.9 13.2–15.6 75 G2 930 1620×1110×1690

*Note: Technical specifications are subject to continuous improvement without prior notice. Custom voltages (380V/400V/415V/440V, 50Hz/60Hz), customized working pressure options (0.6–1.3 MPa), and OEM/ODM configurations are available upon bulk order request.

Operational Benefits of the PMVQ Two-Stage Oil-Cooled PM Compressor

  • Ultra-Tier-1 Energy Efficiency for Energy Audits: Combining horizontal two-stage compression with an oil-cooled PM synchronous motor achieves superior isothermal compression efficiency, reducing power consumption per unit of air by up to 15%–35% compared to single-stage fixed-speed units.
  • Low Vibration, Low Noise & Minimal Residual Oil: Features an optimized oil circuit and vibration isolation mounting that significantly reduces operating decibels. Upgraded multi-stage oil-gas separation delivers ultra-low residual oil content, extending filter life and safeguarding downstream pneumatic systems.
  • 45°C High-Ambient Reliability: Purpose-built for uncompromised continuous duty during hot summer workshop conditions. The enlarged heat exchanger and dual-inverter variable airflow prevent overheating shutdowns, ensuring 24/7 industrial uptime.

Primary Industrial Applications

The Kaishan PMVQ Series two-stage oil-cooled PM VSD screw air compressor is engineered for energy-intensive industrial enterprises with variable air demands and strict electricity-cost-saving targets:

  • Automated Manufacturing & Assembly: Constant-pressure 0.6–0.9 MPa air supply without pressure fluctuation across multi-shift production lines.
  • Automotive, Stamping & Painting: High-efficiency clean compressed air with minimal oil carryover for robotics, stamping presses, and spray booths.
  • Textile, Fiber & Packaging Plants: 24/7 continuous operation with massive annual power bill reductions on high-frequency cycling loads.
  • Industrial Energy-Saving Retrofits: Ideal premium replacement for aging single-stage compressors to achieve government energy audit compliance.

Frequently Asked Questions (FAQ)

Q1: What are the main efficiency advantages of the PMVQ two-stage oil-cooled PM compressor?

The PMVQ-II integrates horizontal two-stage compression with an oil-cooled PM motor. Two-stage compression reduces the compression ratio per stage and interstage temperature, while the oil-cooled design maintains peak motor efficiency across all RPMs. Combined with dual-inverter fan modulation, it achieves ultra-Tier-1 energy savings, especially during partial-load demand (12%–100%).

Q2: How does the dual-inverter system improve partial-load operation?

Unlike conventional compressors where the cooling fan runs at full speed regardless of load, the PMVQ utilizes independent inverters for both the main drive motor and the cooling fan. Under light loads, the fan automatically slows down based on real-time oil temperature, drastically reducing auxiliary power consumption and broadening efficient capacity regulation down to 12%.

Q3: How can international buyers order the PMVQ series with custom plant specifications?

As an authorized China manufacturer and global B2B supplier, Kaishan offers factory-direct wholesale pricing, customized international voltages (380V/400V/415V/440V, 50/60Hz), matching air receivers, refrigerated/desiccant dryers, and genuine replacement maintenance kits. Contact our export sales team for an official FOB/CIF quotation and technical specifications.

RELATED MACHINERY

Frequently Bundled Equipment

DIRECT FACTORY QUOTE

Request Technical Proposal & FOB/CIF Quote for Kaishan KT7D

Connect directly with Zhejiang Bili Machinery's export engineers in Quzhou. Quotes provided within 2 business hours.

Your Name
*Company Name
*Business Email
*WhatsApp / Mobile Phone
*Target Project Requirements

Direct Factory FOB/CIF Pricing  Zero Trading Markups· 100% Pre-Shipment Video Inspection

© 2026 Zhejiang Bili Machinery Co., Ltd. All rights reserved. A Kaishan Group Integrated Export Division.

online service

Hello, I am the online customer service

X