Official Export Subsidiary of Kaishan Group (Est. 1956) | Quzhou Manufacturing Base

Unsure About Equipment Sizing?

Our Quzhou engineering desk calculates the exact borehole diameter, rock hardness, and necessary CFM/Bar ratio for your project.

Category Showcase

Kaishan DTH Drilling Rigs

Heavy-duty surface crawlers and integrated rigs for open-pit mining, quarry blasting, and slope stabilization. High penetration rate and anti-jamming hydraulic system.

Kaishan LG Series Stationary Electric Rotary Screw Air Compressor

The Kaishan LG Series Stationary Electric Rotary Screw Air Compressor (models LG7.5 to LG400) is an industrial-duty electric screw air compressor engineered for 24/7 heavy-duty plant and mining air supply. Covering 7.5–400 kW motor power, 0.8–72.4 m³/min free air delivery, and 0.8–1.3 MPa (8–13 bar) discharge pressure, the LG Series adopts UK K-series asymmetrical rotors with a "Large Rotor, Large Bearing, Low Speed" design (30%–50% lower RPM), direct drive without gearboxes (18.5–250 kW), 0–100% stepless capacity modulation, and tropical high-humidity cooling. Contact our China factory directly for wholesale B2B pricing, custom voltages, OEM/ODM solutions, and fast global delivery.
  • Product Detail Introduction

Core Engineering Features & Performance Advantages

K-Profile Heavy-Duty Air End (Large Rotor, Low RPM)

Features UK-developed K-series asymmetrical screw rotor technology with curved surface-to-surface sealing (4:5 lobe ratio for ≤45 kW; 5:6 for ≥55 kW). Designed with large-diameter rotors and heavy-duty bearings operating at 30%–50% lower RPM than competitors (down to 1480 rpm direct drive via 4-pole motors on 200–250 kW models), significantly reducing noise, vibration, discharge temperature, and mechanical wear.

0–100% Stepless Air Flow Regulation & PID Economy

Equipped with automatic 0–100% stepless capacity modulation that tracks actual compressed air consumption in real time, automatically reducing motor amperage during partial load and shutting down during extended idle. Integrated PID parameters and reinforced ramp-up motor controls deliver substantial kWh savings exceeding GB19153 national efficiency standards.

Tropical High-Humidity Cooling & Foundation-Free Setup

Engineered with an oversized heat dissipation system specifically adapted for harsh Asian tropical climates with high ambient temperatures and excessive humidity. Excellent internal vibration isolation and acoustic baffling allow simple installation on flat factory floors without dedicated anchoring foundations.

Technical Parameters & Specifications Datasheet (LG Single-Stage Series)

Model Max Pressure
(MPa)
Air Delivery
(m³/min)
Motor Power
(kW)
Discharge Outlet Weight
(kg)
Dimensions (L×W×H)
(mm)
LG7.5-8 0.8 1.2 7.5 G1 260 1020×660×1050
LG7.5-10 1.0 1.0 7.5 G1 260 1020×660×1050
LG7.5-13 1.3 0.8 7.5 G1 260 1020×660×1050
LG11-8 0.8 1.7 11 G1 420 1060×760×1230
LG11-10 1.0 1.5 11 G1 420 1060×760×1230
LG11-13 1.3 1.2 11 G1 420 1060×760×1230
LG15-8 0.8 2.3 15 G1 440 1060×760×1230
LG15-10 1.0 2.1 15 G1 440 1060×760×1230
LG15-13 1.3 1.6 15 G1 440 1060×760×1230
LG18-8GA 0.8 3.37 18.5 G1 510 1370×900×1110
LG22-8GA 0.8 4.2 22 G1 540 1370×900×1110
LG30-8GA 0.8 5.8 30 G1½ 650 1600×960×1220
LG37-8GA 0.8 7.0 37 G1½ 700 1600×960×1220
LG45-8GA 0.8 8.7 45 G1½ 880 1630×960×1220
LG55-8GA 0.8 10.5 55 G1½ 1090 1850×1200×1500
LG75-8GA 0.8 14.2 75 G2 1550 2160×1220×1580
LG75-10GA 1.0 11.6 75 G2 1550 2160×1220×1580
LG75-13GA 1.3 9.5 75 G2 1550 2160×1220×1580
LG90-8GA 0.8 17.2 90 G2 2000 2160×1320×1580
LG90-10GA 1.0 14.2 90 G2 2000 2160×1320×1580
LG90-13GA 1.3 11.6 90 G2 2000 2160×1320×1580
LG110-8GA 0.8 20.8 110 DN65 2700 2440×1400×1710
LG110-10GA 1.0 16.9 110 DN65 2700 2440×1400×1710
LG110-13GA 1.3 13.9 110 DN65 2700 2440×1400×1710
LG132-8GA 0.8 24.3 132 DN65 2800 2440×1400×1710
LG132-10GA 1.0 20.9 132 DN65 2800 2440×1400×1710
LG132-13GA 1.3 16.5 132 DN65 2800 2440×1400×1710
LG160-8GA 0.8 30.0 160 DN80 4200 3060×1860×2050
LG160-10GA 1.0 23.8 160 DN80 4200 3060×1860×2050
LG160-13GA 1.3 20.5 160 DN80 4200 3060×1860×2050
LG185-8GA 0.8 33.5 185 DN80 4250 3060×1860×2050
LG185-10GA 1.0 29.5 185 DN80 4250 3060×1860×2050
LG185-13GA 1.3 23.6 185 DN80 4250 3060×1860×2050
LG200-8GA 0.8 36.8 200 DN80 4300 3060×1860×2050
LG200-10GA 1.0 32.9 200 DN80 4300 3060×1860×2050
LG200-13GA 1.3 29.2 200 DN80 4300 3060×1860×2050
LG220-8GA 0.8 42.5 220 DN100 4800 3360×2160×2170
LG220-10GA 1.0 36.5 220 DN100 4700 3360×2160×2170
LG220-13GA 1.3 32.8 220 DN100 4700 3360×2160×2170
LG250-8GB 0.8 45.5 250 DN100 5450 3360×2160×2170
LG250-8GA 0.8 43.8 250 DN100 5000 3360×2160×2170
LG250-10GA 1.0 41.9 250 DN100 4870 3360×2160×2170
LG250-13GA 1.3 36.2 250 DN100 4770 3360×2160×2170
LG280-8GA 0.8 49.8 280 DN125 7000 3660×2260×2325
LG280-10GA 1.0 44.7 280 DN125 7000 3660×2260×2325
LG280-13GA 1.3 41.5 280 DN125 7000 3660×2260×2325
LG315-8GA 0.8 55.0 315 DN125 7100 3660×2260×2325
LG315-10GA 1.0 49.0 315 DN125 7200 3660×2260×2325
LG315-13GA 1.3 44.1 315 DN125 7200 3660×2260×2325
LG355-8GA 0.8 60.6 355 DN125 7400 3660×2260×2325
LG355-10GA 1.0 54.6 355 DN125 7400 3660×2260×2325
LG355-13GA 1.3 48.5 355 DN125 7400 3660×2260×2325
LG400-8GA 0.8 72.4 400 DN125 7400 4260×2260×2260
LG400-10GA 1.0 60.0 400 DN125 7400 4260×2260×2260
LG400-13GA 1.3 54.2 400 DN125 7400 4260×2260×2260

*Note: For LG400 units, the cooling section is split from the main compressor chassis. Technical specifications are subject to continuous improvement without prior notice. Custom voltages (380V/400V/415V/440V/6kV/10kV, 50Hz/60Hz) and OEM/ODM options are available upon bulk request.

Operational Benefits of the LG Series Stationary Screw Compressor

  • Unrivaled Heavy-Duty Power Span (7.5 kW to 400 kW): Covers small workshops to mega-manufacturing plants with 48 precision-engineered models, delivering 0.8 to 72.4 m³/min free air delivery across 0.8 MPa (8 bar), 1.0 MPa (10 bar), and 1.3 MPa (13 bar) working pressures.
  • Gearbox-Free Direct Drive Reliability: Models from 18.5 kW to 250 kW use a 1:1 direct coupling without reduction gearboxes, while 200 kW and 250 kW models use 4-pole low-speed motors down to 1480 rpm, minimizing transmission power loss and mechanical fatigue.
  • ISO & CE Certified Factory Quality: Built to strict international manufacturing standards, fully meeting and exceeding GB19153 energy-efficiency limits for heavy 24/7 continuous industrial duty.

Primary Industrial Applications

The Kaishan LG Series stationary electric rotary screw air compressor is engineered for continuous-duty operations across demanding industrial sectors:

  • Heavy Mining & Quarrying: Continuous compressed air supply for underground pneumatic tools, ventilation, and mineral processing.
  • Shipbuilding & Marine Engineering: High-volume air for shipyard sandblasting, heavy steel surface treatment, and pneumatic winches.
  • Steel Metallurgy & Chemical Plants: 24/7 non-stop plant instrumentation, valve actuation, and bulk material pneumatic conveying.
  • Infrastructure & Energy Projects: Reliable compressed air for hydropower dam construction, highway tunnel ventilation, and power utilities.

Frequently Asked Questions (FAQ)

Q1: What is the core design philosophy of the Kaishan LG Series air end?

The LG Series adopts a "Large Rotor, Large Bearing, Low Speed" design philosophy based on UK K-series profile geometry. Operating at 30%–50% lower RPM than conventional compressors, it forms a hydrodynamic lubrication oil film that reduces noise, lowers discharge temperatures, increases rotor rigidity, and significantly extends air end operating life.

Q2: What capacity range and pressure ratings are covered in the LG single-stage series?

The LG series covers motor ratings from 7.5 kW up to 400 kW, delivering free air delivery from 0.8 m³/min up to 72.4 m³/min with discharge pressure options of 0.8 MPa, 1.0 MPa, and 1.3 MPa across 48 configurations.

Q3: How can international industrial clients request factory-direct wholesale pricing and delivery?

As an authorized China manufacturer and global B2B supplier, Kaishan provides factory-direct wholesale pricing, flexible MOQ, custom voltages (including medium/high voltage options), and complete air treatment packages (air tanks, refrigerated/desiccant dryers, and line filters). Contact our export team for an official FOB/CIF quotation and technical datasheet.

RELATED MACHINERY

Frequently Bundled Equipment

DIRECT FACTORY QUOTE

Request Technical Proposal & FOB/CIF Quote for Kaishan KT7D

Connect directly with Zhejiang Bili Machinery's export engineers in Quzhou. Quotes provided within 2 business hours.

Your Name
*Company Name
*Business Email
*WhatsApp / Mobile Phone
*Target Project Requirements

Direct Factory FOB/CIF Pricing  Zero Trading Markups· 100% Pre-Shipment Video Inspection

© 2026 Zhejiang Bili Machinery Co., Ltd. All rights reserved. A Kaishan Group Integrated Export Division.

online service

Hello, I am the online customer service

X