Official Export Subsidiary of Kaishan Group (Est. 1956) | Quzhou Manufacturing Base

Unsure About Equipment Sizing?

Our Quzhou engineering desk calculates the exact borehole diameter, rock hardness, and necessary CFM/Bar ratio for your project.

Category Showcase

Kaishan DTH Drilling Rigs

Heavy-duty surface crawlers and integrated rigs for open-pit mining, quarry blasting, and slope stabilization. High penetration rate and anti-jamming hydraulic system.

Kaishan BK Series Rotary Screw Air Compressor

The Kaishan BK Series Rotary Screw Air Compressor (models BK7.5 to BK132) is a stationary industrial electric air compressor engineered for continuous 24-hour unattended factory operation. Covering 7.5–132 kW motor power, 1.0–22.0 m³/min free air delivery, and 0.8–1.3 MPa (8–13 bar) working pressure, the BK Series features a high-efficiency IP54 Class F motor with genuine SKF bearings, non-stop lubrication, built-in oil-gas separation, an anti-oil-spray intake valve, and a smart HMI controller with multi-unit interlocking. Contact our China factory directly for wholesale B2B pricing, custom voltages, OEM/ODM solutions, and fast global delivery.
  • Product Detail Introduction

Core Engineering Features & Performance Advantages

Next-Gen High-Efficiency Motor & SKF Bearings

Driven by a new-generation low-consumption, high-efficiency electric motor (7.5–132 kW) delivering high starting torque, Class F insulation, and IP54 protection. Equipped with genuine SKF bearings for ultra-low operating noise (63–72 dB(A)) and extended service life, plus an external lubrication port allowing non-stop greasing during operation.

24-Hour Unattended Smart HMI & Multi-Unit Interlock

Features a user-friendly HMI display with intuitive operation and real-time operating-status visibility. Engineered for 24-hour unattended operation with automatic fault and maintenance alerts, plus reserved auxiliary output ports for multi-compressor interlocking control and remote diagnostics.

Built-In Oil Separation & Anti-Oil-Spray Intake Valve

Incorporates an internal oil-gas separator design that ensures superior oil separation efficiency and minimized oil carryover from the initial engineering stage, paired with a high-efficiency ON/OFF intake control valve featuring an integrated check valve to prevent oil back-spraying upon shutdown.

Technical Parameters & Specifications Datasheet

Series Model Discharge Pressure
(MPa)
Air Delivery
(m³/min)
Motor Power
(kW)
Discharge Outlet Weight
(kg)
Dimensions
(mm)
BK Series BK7.5-8G 0.8 1.2 7.5 G¾ 200 800×620×800
BK7.5G-8 0.8 1.1 7.5 G¾ 200 880×510×800
BK11-8G 0.8 1.7 11 G1 280 1000×670×1090
BK15-8G 0.8 2.4 15 G1 280 1000×670×1090
BK15-8 0.8 2.4 15 G1 270 700×670×1250
BK15-10 1.0 2.2 15 G1 270 700×670×1250
BK15-13 1.3 1.7 15 G1 270 700×670×1250
BK22-8G 0.8 3.45 22 G1 390 1200×800×1120
BK22-10G 1.0 3.2 22 G1 390 1200×800×1120
BK22-13G 1.3 2.7 22 G1 390 1200×800×1120
BK30-8G 0.8 5.0 30 G1½ 470 1340×850×1330
BK30-10G 1.0 4.4 30 G1½ 470 1340×850×1330
BK30-13G 1.3 3.6 30 G1½ 470 1340×850×1330
BK37-8G 0.8 6.0 37 G1½ 560 1340×850×1330
BK37-10G 1.0 5.4 37 G1½ 560 1340×850×1330
BK37-13G 1.3 4.6 37 G1½ 560 1340×850×1330
BK45-8G 0.8 7.1 45 G1½ 720 1480×1030×1340
BK45-10G 1.0 6.2 45 G1½ 720 1480×1030×1340
BK45-13G 1.3 5.6 45 G1½ 720 1480×1030×1340
BK55-8G 0.8 10 55 G1½ 790 1480×1030×1340
BK55-10G 1.0 7.2 55 G1½ 790 1480×1030×1340
BK55-13G 1.3 6.2 55 G1½ 790 1480×1030×1340
BK75-8 0.8 13 75 G2 1200 1800×1190×1710
BK90-8 0.8 16 90 G2 1240 1800×1190×1710
BK110T-8 0.8 21 110 DN65 1630 2100×1230×1730
BK110-8 0.8 21 110 DN65 1680 2100×1230×1730
BK132T-8 0.8 24 132 DN65 1670 2100×1230×1730
BK132-8 0.8 24 132 DN65 1750 2100×1230×1730
KS175A-8F 0.8 24 132 DN65 1470 1800×1230×1670
KS150-8-II 0.8 22 110 DN65 1950 2100×1230×1730
KS175-8-II 0.8 25 132 DN65 1990 2100×1230×1730

*Note: Technical specifications are subject to continuous improvement without prior notice. Custom voltages (380V/400V/415V/440V, 50Hz/60Hz), English/multilingual PLC interfaces, and OEM/ODM configurations are available upon request for bulk orders.

Operational Benefits of the BK Series Screw Air Compressor

  • Broad Power & Pressure Versatility: Spans 31 industrial models across 7.5 kW to 132 kW motor ratings, delivering 1.0 to 22.0 m³/min free air delivery at 0.8 MPa (8 bar), 1.0 MPa (10 bar), and 1.3 MPa (13 bar) working pressures to match diverse factory pneumatic demands.
  • Continuous Reliability & Zero-Downtime Maintenance: IP54 Class F motors, heavy-duty SKF bearings with non-stop lubrication ports, and internal oil-gas separation minimize oil consumption and unscheduled maintenance pauses during 24/7 industrial shifts.
  • Centralized Multi-Unit Networking: Built-in auxiliary communication interfaces allow multiple BK series compressors to operate in an interlocked sequence with remote diagnostics, optimizing plant-wide energy efficiency and air header stability.

Primary Industrial Applications

The Kaishan BK Series stationary rotary screw air compressor provides clean, continuous compressed air across manufacturing, processing, and heavy industrial facilities:

  • Automated Manufacturing & CNC: Continuous 0.8–1.3 MPa air supply for pneumatic actuators, CNC machining centers, and assembly lines.
  • Textile, Packaging & Printing: Stable, low-oil-carryover compressed air for high-speed air-jet looms, blowing, and automated packaging.
  • Metallurgy, Cement & Chemical Plants: Heavy-duty 24/7 unattended air generation for valve control, material conveying, and plant instrumentation.
  • Automotive & Metal Fabrication: Reliable compressed air for laser-cutting assist, sandblasting, robotic welding, and spray-painting lines.

Frequently Asked Questions (FAQ)

Q1: What power and pressure range does the Kaishan BK Series screw air compressor cover?

The BK Series covers motor power ratings from 7.5 kW up to 132 kW, offering free air delivery from 1.0 m³/min to 22.0 m³/min and discharge pressures of 0.8 MPa, 1.0 MPa, and 1.3 MPa across 31 model configurations.

Q2: Can multiple BK Series compressors be linked for automated plant operation?

Yes. Every BK Series compressor is equipped with an intelligent HMI controller featuring reserved auxiliary output interfaces, supporting 24-hour unattended operation, multi-unit interlocked sequencing, and remote diagnostic monitoring.

Q3: How can international B2B buyers order BK Series compressors with custom voltages and air dryers?

As an authorized China manufacturer and global B2B supplier, we provide factory-direct wholesale quotes, custom industrial voltages, matching air receivers, refrigerated/desiccant air dryers, line filters, and genuine maintenance kits (oil separators, air filters, oil filters, and lubricants). Contact our export team for an official FOB/CIF quotation.

RELATED MACHINERY

Frequently Bundled Equipment

DIRECT FACTORY QUOTE

Request Technical Proposal & FOB/CIF Quote for Kaishan KT7D

Connect directly with Zhejiang Bili Machinery's export engineers in Quzhou. Quotes provided within 2 business hours.

Your Name
*Company Name
*Business Email
*WhatsApp / Mobile Phone
*Target Project Requirements

Direct Factory FOB/CIF Pricing  Zero Trading Markups· 100% Pre-Shipment Video Inspection

© 2026 Zhejiang Bili Machinery Co., Ltd. All rights reserved. A Kaishan Group Integrated Export Division.

online service

Hello, I am the online customer service

X