Official Export Subsidiary of Kaishan Group (Est. 1956) | Quzhou Manufacturing Base

Unsure About Equipment Sizing?

Our Quzhou engineering desk calculates the exact borehole diameter, rock hardness, and necessary CFM/Bar ratio for your project.

Category Showcase

Kaishan DTH Drilling Rigs

Heavy-duty surface crawlers and integrated rigs for open-pit mining, quarry blasting, and slope stabilization. High penetration rate and anti-jamming hydraulic system.

Kaishan PMVQ-II Series Two-Stage Oil-Cooled PM VSD Screw Air Compressor

The Kaishan PMVQ-II Series Two-Stage Oil-Cooled PM VSD Screw Air Compressor (models PMVQ22-II to PMVQ75H-II) is an ultra-Tier-1 energy-saving industrial compressor engineered for high-consumption manufacturing plants. Delivering 22–75 kW motor power, 3.35–16.5 m³/min free air delivery, and dual pressure options of 0.6–0.9 MPa and 1.0–1.3 MPa, the PMVQ-II Series combines horizontal two-stage compression with an oil-cooled permanent magnet motor, independent dual inverters (main motor + fan) broadening stepless regulation to 12%–100%, an Inovance heavy-duty VFD, a 6090 color controller, and 45°C ambient thermal reliability. Contact our China factory directly for wholesale B2B pricing, custom voltages, OEM/ODM solutions, and fast global delivery.
  • Product Detail Introduction

Core Engineering Features & Performance Advantages

Horizontal Two-Stage Compression & Oil-Cooled PM Motor

Features a horizontal two-stage rotor layout powered by an oil-cooled permanent magnet synchronous motor delivering ultra-Tier-1 energy efficiency. Optimized Y-profile rotor geometries minimize internal leakage, while comprehensive interstage cooling lowers compression ratios, delivering higher air volume and significantly lower specific power consumption for deep factory energy savings.

Dual-Inverter System & 12%–100% Wide-Range Modulation

Equipped with an independent dual-inverter system governing both the main motor and the cooling fan. The variable-speed fan automatically modulates based on oil temperature to eliminate wasted fan power during light loads, broadening airflow stepless regulation to an impressive 12%–100% range with industry-leading partial-load efficiency.

Inovance VFD, 6090 Color Controller & 45°C Thermal Design

Upgraded with an Inovance heavy-duty dedicated PM frequency inverter and the next-gen 6090 color screen controller featuring motor demagnetization pre-warning, advanced sensor diagnostics, and robust IoT telemetry. Redesigned internal air ducts and oversized coolers withstand 45°C ambient temperatures without high-temperature tripping.

Technical Parameters & Specifications Datasheet (PMVQ-II Series)

Model Discharge Pressure
(MPa)
Air Delivery
(m³/min)
Motor Power
(kW)
Discharge Outlet Weight
(kg)
Dimensions (L×W×H)
(mm)
PMVQ22-II 0.6–0.9 3.8–4.6 22 G1 450 1150×770×1200
PMVQ22H-II 1.0–1.3 3.35–3.9 22 G1 450 1150×770×1200
PMVQ37-II 0.6–0.9 6.5–7.65 37 G1½ 590 1300×950×1350
PMVQ37H-II 1.0–1.3 5.5–6.4 37 G1½ 590 1300×950×1350
PMVQ55-II 0.6–0.9 10.5–12.5 55 G1½ 950 1500×1040×1580
PMVQ55H-II 1.0–1.3 8.2–9.5 55 G1½ 950 1500×1040×1580
PMVQ75-II 0.6–0.9 14.5–16.5 75 G2 1300 1620×1090×1690
PMVQ75H-II 1.0–1.3 10–12.5 75 G2 1300 1620×1090×1690

*Note: Technical specifications are subject to continuous improvement without prior notice. Standard configurations cover 0.6–0.9 MPa and 1.0–1.3 MPa pressure ratings. Custom voltages (380V/400V/415V/440V, 50Hz/60Hz) and OEM/ODM options are available upon bulk order request.

Operational Benefits of the PMVQ-II Two-Stage Oil-Cooled PM Compressor

  • Ultra-Tier-1 Energy Efficiency for Energy Audits: Combining horizontal two-stage compression with an oil-cooled PM synchronous motor achieves superior isothermal compression efficiency, reducing power consumption per unit of air by up to 15%–35% compared to single-stage fixed-speed units.
  • Low Vibration, Low Noise & Minimal Residual Oil: Features an optimized oil circuit and vibration isolation mounting that significantly reduces operating decibels. Upgraded multi-stage oil-gas separation delivers ultra-low residual oil content, extending filter life and safeguarding downstream pneumatic systems.
  • 45°C High-Ambient Reliability: Purpose-built for uncompromised continuous duty during hot summer workshop conditions. The enlarged heat exchanger and dual-inverter variable airflow prevent overheating shutdowns, ensuring 24/7 industrial uptime.

Primary Industrial Applications

The Kaishan PMVQ-II Series two-stage oil-cooled PM VSD screw air compressor is engineered for energy-intensive industrial enterprises with variable air demands and strict electricity-cost saving targets:

  • Automated Manufacturing & Assembly: Constant-pressure 0.6–1.3 MPa air supply without pressure fluctuation across multi-shift production lines.
  • Automotive, Stamping & Painting: High-efficiency clean compressed air with minimal oil carryover for robotics, stamping presses, and spray booths.
  • Textile, Fiber & Packaging Plants: 24/7 continuous operation with massive annual power bill reductions on high-frequency cycling loads.
  • Industrial Energy-Saving Retrofits: Ideal premium replacement for aging single-stage compressors to achieve government energy audit compliance.

Frequently Asked Questions (FAQ)

Q1: What are the main efficiency advantages of the PMVQ-II two-stage oil-cooled PM compressor?

The PMVQ-II integrates horizontal two-stage compression with an oil-cooled PM motor. Two-stage compression reduces the compression ratio per stage and interstage temperature, while the oil-cooled design maintains peak motor efficiency across all RPMs. Combined with dual-inverter fan modulation, it achieves ultra-Tier-1 energy savings, especially during partial-load demand (12%–100%).

Q2: What is the difference between standard and "H" models in the PMVQ-II series?

Standard models (e.g., PMVQ22-II, PMVQ37-II) operate within 0.6–0.9 MPa for standard plant pneumatic networks. Models with the "H" designation (e.g., PMVQ22H-II, PMVQ37H-II) are engineered with high-pressure gear ratios and heavy-duty seals to deliver 1.0–1.3 MPa for applications requiring higher pressure air delivery.

Q3: How can international buyers order the PMVQ-II series with custom plant specifications?

As an authorized China manufacturer and global B2B supplier, Kaishan offers factory-direct wholesale pricing, customized international voltages (380V/400V/415V/440V, 50/60Hz), matching air receivers, refrigerated/desiccant dryers, and genuine replacement maintenance kits. Contact our export sales team for an official FOB/CIF quotation and technical specifications.

RELATED MACHINERY

Frequently Bundled Equipment

DIRECT FACTORY QUOTE

Request Technical Proposal & FOB/CIF Quote for Kaishan KT7D

Connect directly with Zhejiang Bili Machinery's export engineers in Quzhou. Quotes provided within 2 business hours.

Your Name
*Company Name
*Business Email
*WhatsApp / Mobile Phone
*Target Project Requirements

Direct Factory FOB/CIF Pricing  Zero Trading Markups· 100% Pre-Shipment Video Inspection

© 2026 Zhejiang Bili Machinery Co., Ltd. All rights reserved. A Kaishan Group Integrated Export Division.

online service

Hello, I am the online customer service

X