Official Export Subsidiary of Kaishan Group (Est. 1956) | Quzhou Manufacturing Base

Unsure About Equipment Sizing?

Our Quzhou engineering desk calculates the exact borehole diameter, rock hardness, and necessary CFM/Bar ratio for your project.

Category Showcase

Kaishan DTH Drilling Rigs

Heavy-duty surface crawlers and integrated rigs for open-pit mining, quarry blasting, and slope stabilization. High penetration rate and anti-jamming hydraulic system.

All-in-One Laser Cutting Dedicated Screw Air Compressor Station

The All-in-One Laser Cutting Dedicated Screw Air Compressor Station (models POXXA, POGFDXA, OXXA, OGFDXA, 11–55 kW) is a 4-in-1 skid-mounted system engineered for fiber laser cutting assist gas. Delivering 1.1–6.6 m³/min at 1.6–1.8 MPa (16–18 bar), this plug-and-play station integrates a rotary screw air compressor, a high-efficiency refrigerated air dryer, 4-stage precision line filters (oil ≤0.001 ppm, dust ≤0.01 μm, dew point 3–10°C), and an ASME/CE air tank (300L/500L/800L). Available in fixed-speed and PM VSD configurations to protect laser optical lenses and slash assist gas costs. Contact our China factory directly for wholesale B2B pricing, custom voltages, OEM/ODM solutions, and fast global delivery.
  • Product Detail Introduction

Core Engineering Features & Performance Advantages

4-in-1 Compact Plug & Play Integration

Seamlessly integrates a heavy-duty rotary screw compressor, high-efficiency refrigerated air dryer, 4-stage precision line filters with water separator, and an ASME/CE-certified air receiver tank (300L/500L/800L) onto a single skid-mounted frame. Eliminates complex external interconnecting piping, cuts footprint by over 50%, and enables instant plug-and-play installation beside laser machines.

1.6–1.8 MPa High-Pressure Ultra-Clean Assist Air

Engineered for fiber laser cutting heads that require a constant 1.6 to 1.8 MPa assist gas pressure. Delivers breathing-grade clean air with residual oil content ≤0.001 ppm, solid dust particle filtration ≤0.01 μm, and stable pressure dew point between 3°C and 10°C, fully protecting delicate laser protective mirrors, focusing lenses, and cutting nozzles from contamination and burr formation.

Fixed-Speed & PM VSD Energy-Saving Configurations

Available in standard fixed-speed models, permanent magnet variable speed drive (PM VSD) models with stepless speed regulation, and two-stage compression energy-saving configurations (EOGFD / PEOGFD series). Adapts seamlessly to fluctuating sheet metal cutting cycles, eliminating unloading waste and dramatically reducing operating kWh per cutting hour.

Technical Parameters & Specifications Datasheets

1. Air-Cooled Fixed-Speed Laser Supporting Compressor Units (Base Units)
Model Air Delivery
(m³/min)
Discharge Pressure
(MPa)
Main Motor Power
(kW/HP)
Air Outlet Weight
(kg)
Dimensions (L×W×H)
(mm)
OX-1.1/16 1.1 1.6 11/15 Rc3/4 340 1060×680×1000
OX-1.28/16 1.28 1.6 15/20 Rc3/4 340 1060×680×1000
OGFD-2.2/16 2.2 1.6 22/30 Rc1 550 1450×700×1110
OGFD-3.5/16 3.5 1.6 37/50 Rc1 840 1660×820×1230
EOGFD-4.4/16 4.4 1.6 37/50 G1-1/4 1600 1980×950×1485
EOGFD-6.6/16 6.6 1.6 55/75 G1-1/4 1880 2240×950×1485
2. Air-Cooled PM Variable Frequency Laser Supporting Compressor Units (Base Units)
Model Air Delivery
(m³/min)
Discharge Pressure
(MPa)
Main Motor Power
(kW/HP)
Air Outlet Weight
(kg)
Dimensions (L×W×H)
(mm)
POX-1.1/16 1.1 1.6 11/15 Rc3/4 360 1060×680×1000
POX-1.28/16 1.28 1.6 15/20 Rc3/4 360 1060×680×1000
POGFD-2.2/16 2.2 1.6 22/30 Rc1 560 1450×700×1110
POGFD-3.5/16 3.5 1.6 37/50 Rc1 860 1660×820×1230
PEOGFD-4.4/16 4.4 1.6 37/50 G1-1/4 1560 1980×950×1485
PEOGFD-6.6/16 6.6 1.6 55/75 G1-1/4 1830 2240×950×1485
3. Air-Cooled Fixed-Speed Laser Dedicated All-in-One Compressor Stations (Integrated with Tank & Dryer)
Model Air Delivery
(m³/min)
Discharge Pressure
(MPa)
Main Motor Power
(kW/HP)
Air Outlet Weight
(kg)
Dimensions (L×W×H)
(mm)
Air Tank Volume
(L)
OXXA-1.1/16 1.1 1.6 11/15 Rc3/4 550 1720×695×1543 300
OXXA-1.28/16 1.28 1.6 15/20 Rc3/4 550 1720×695×1543 300
OGFDXA-2.2/16 2.2 1.6 22/30 Rc1 920 2080×850×1800 500
OGFDXA-3.5/16 3.5 1.6 37/50 Rc1 1200 2590×820×1990 800
4. Air-Cooled PM Variable Frequency Laser Dedicated All-in-One Compressor Stations (Integrated with Tank & Dryer)
Model Air Delivery
(m³/min)
Discharge Pressure
(MPa)
Main Motor Power
(kW/HP)
Air Outlet Weight
(kg)
Dimensions (L×W×H)
(mm)
Air Tank Volume
(L)
POXXA-1.1/16 1.1 1.6 11/15 Rc3/4 570 1720×695×1543 300
POXXA-1.28/16 1.28 1.6 15/20 Rc3/4 570 1720×695×1543 300
POXXA-1.2/18 1.2 1.8 15/20 Rc3/4 570 1720×695×1543 300
POGFDXA-2.2/16 2.2 1.6 22/30 Rc1 930 2080×850×1800 500
POGFDXA-2.2/18 2.2 1.8 22/30 Rc1 930 2080×850×1800 500
POGFDXA-3.5/16 3.5 1.6 37/50 Rc1 1220 2590×820×1990 800

*Technical Notes:

  • Base Compressor Units (OX, OGFD, EOGFD, POX, POGFD, PEOGFD) include only the bare air compressor.
  • All-in-One Integrated Stations (OXXA, OGFDXA, POXXA, POGFDXA) integrate the air compressor, refrigerated air dryer, 4-stage precision line filters, moisture separator, and air receiver tank on one skid.
  • Power supply: Compressor motor AC 380V/50Hz/3PH; All-in-one refrigerated dryer AC 220V/50Hz/1PH. Custom international voltages (400V/415V/440V/460V, 60Hz) are available.
  • Air quality: Base compressor discharge residual oil content ≤3 ppm. All-in-one integrated station discharge residual oil content ≤0.001 ppm, solid particulate filtration size ≤0.01 μm, pressure dew point 3–10°C.
  • EOGFD and PEOGFD units are two-stage compression, energy-saving models that offer substantially higher energy efficiency and power savings than single-stage units.

Operational Benefits for Industrial Fiber Laser Cutting

  • Dramatic Cost Reduction vs. Bottled Nitrogen / Liquid Oxygen: Using 1.6–1.8 MPa purified compressed assist air for carbon steel, stainless steel, and aluminum sheet cutting slashes operating gas costs by 70%–90% compared to high-pressure bottled nitrogen or liquid oxygen tanks, delivering rapid equipment payback within 3 to 6 months.
  • Extended Lens Life & Burr-Free Cut Quality: The integrated refrigerated dryer and 4-stage filtration system eliminate trace oil vapor and liquid moisture, preventing cutting head mirror fogging, lens burns, and slag adhering to workpiece edges.
  • Compact Skid Layout & Effortless Relocation: The 4-in-1 integrated structure eliminates the floor clutter of loose tanks and external dryers. Built with forklift slots and leveling casters/feet for swift relocation across sheet metal workshops.

Primary Industrial Applications

The dedicated all-in-one laser cutting screw air compressor station is purpose-built to provide reliable high-pressure assist gas across precision metal fabrication industries:

  • Fiber Laser Sheet Metal Cutting: High-pressure 1.6–1.8 MPa assist gas for 1kW to 30kW fiber laser machines cutting carbon steel, stainless steel, and aluminum plates.
  • Laser Tube & Pipe Processing: Continuous, dry assist gas for high-speed automated chuck-fed round, square, and rectangular tube laser cutting systems.
  • Automotive & Sheet Metal Stamping: Clean air supply for laser trimming, 3D robotic cutting cells, and automotive body component profiling.
  • Precision Electrical Enclosures & Cabinets: Burr-free, oxidation-free edge cutting for server racks, control panels, and kitchenware fabrication.

Frequently Asked Questions (FAQ)

Q1: Why is an all-in-one integrated air compressor necessary for fiber laser cutting?

Fiber laser cutting requires high-pressure (1.6–1.8 MPa) assist air that is completely free of liquid water, oil aerosols, and particulates. The all-in-one station integrates the compressor, high-efficiency dryer, 4-stage filtration (≤0.001 ppm oil, ≤0.01 μm dust), and storage tank onto a single skid, preventing moisture condensation in field piping and protecting expensive laser optics.

Q2: What is the difference between base compressor units and all-in-one integrated stations?

Base compressor units (OX / OGFD / POX / POGFD) supply only the bare rotary screw compressor, suitable for plants that already have centralized high-pressure air dryers and receiver tanks. All-in-one stations (OXXA / OGFDXA / POXXA / POGFDXA) include the built-in refrigerated dryer, 4-stage filters, and 300L/500L/800L air tank for standalone, plug-and-play installation.

Q3: How can international buyers request factory-direct quotations and custom voltage builds?

As an authorized China manufacturer and global B2B supplier, we provide factory-direct wholesale pricing, flexible MOQ, customized voltages (380V/400V/415V/440V, 50/60Hz), and complete spare filter packages. Contact our export sales team for an official FOB/CIF quotation and technical engineering datasheet.

RELATED MACHINERY

Frequently Bundled Equipment

DIRECT FACTORY QUOTE

Request Technical Proposal & FOB/CIF Quote for Kaishan KT7D

Connect directly with Zhejiang Bili Machinery's export engineers in Quzhou. Quotes provided within 2 business hours.

Your Name
*Company Name
*Business Email
*WhatsApp / Mobile Phone
*Target Project Requirements

Direct Factory FOB/CIF Pricing  Zero Trading Markups· 100% Pre-Shipment Video Inspection

© 2026 Zhejiang Bili Machinery Co., Ltd. All rights reserved. A Kaishan Group Integrated Export Division.

online service

Hello, I am the online customer service

X